DIY (Do It Yourself) vaping has gained popularity among vape shop who enjoy customizing their experience, saving money, and reducing waste. Building and refilling your pods is a creative and cost-effective approach to vaping. In this guide, we will explore the art of building and refilling pods, providing you with the knowledge and skills to take control of your vaping experience.
Building Your Pods
1. Choose a Rebuildable Pod
To start building your pods, select a rebuildable pod system. These pods are designed to be disassembled, allowing you to replace coils and customize your vaping experience.
2. Gather Your Tools
You’ll need a set of tools for building pods, including wire cutters, ceramic tweezers, a coil winding jig, and cotton wicking material. Having a clean and organized workspace is essential.
3. Coil Building
Learn how to build your own coils or purchase pre-made coils. Coil building involves wrapping resistance wire around a coil jig to create a coil of your desired resistance. It requires practice to perfect, but it allows for customization.
4. Installing Coils
Carefully install the coil into the rebuildable pod, ensuring it is positioned correctly and secured. Use ceramic tweezers to adjust the coil if necessary.
Wicking involves threading cotton through the coil. Proper wicking ensures the coil gets enough e-liquid for efficient vaporization. Trim the cotton carefully to avoid excess material, which can cause dry hits.
6. Prime and Test
Before using the rebuilt pod, prime it by saturating the wick with e-liquid and let it sit for a few minutes. Test the resistance of your coil on a regulated mod to ensure it falls within a safe range.
Refilling Your Pods
1. Disassemble the Pod
Carefully disassemble your pod, following the manufacturer’s instructions. Some pods have magnetic connections, while others require screws to be removed.
2. Drain or Clean
If you’re refilling an existing pod, drain any leftover e-liquid and clean the pod components. Ensure it’s completely dry before proceeding.
3. Select E-Liquid
Choose your preferred e-liquid, considering the flavor, nicotine strength, and PG/VG ratio that suits your taste.
4. Fill the Pod
Use a fine-tipped dropper or syringe to fill the pod’s e-liquid chamber, being mindful not to overfill. Leave some space for air at the top.
5. Assemble the Pod
Reassemble the pod carefully, ensuring all components are securely in place.
6. Prime and Wait
Before vaping, prime the coil by taking a few dry puffs (inhaling without firing the device) to draw e-liquid into the wick. Let the pod sit for a few minutes to ensure the coil is fully saturated.
When building and refilling pods, safety should be your top priority. Be cautious when handling resistance wire and batteries, and always follow safety guidelines and recommendations provided by the pod and coil manufacturers.
Building and refilling pods is an art that allows vapers to create a personalized and satisfying vaping experience. By learning these skills, you can take control of your vaping setup, experiment with different coil configurations, and save money on replacement pods. However, it’s crucial to approach DIY vaping with knowledge, patience, and safety in mind for a fulfilling and safe vaping journey.