Finding a good gas boiler service is important when it comes to taking care of basic boiler issues. Since there can be so many reasons why a gas boiler can become non-functional, it is important to hire a gas boiler service that is able to take care of the problem at an affordable price. Gas boiler servicing should include the following; thermostat checks, water filling, pressure checks, carbon monoxide checks and much more. Here are some other basic troubleshooting servicing tips:
Possible Problems and Repairs
Some of the possible problems that can be related to boilers include; low water levels, thermostat malfunction, no power to the boiler and much more. A good gas boiler service will make sure to check circuit breakers and fuse controls for any problem issues. Sometimes, the boiler may have a blown fuse. If this is the problem, then there are certain precautions that should be taken. A quality gas boiler servicing company will know how to take care of basic problems such as these. There should also be a check done on the boiler to make sure that the psi pressure is between 12 and 15. Some boilers do not come with pressure reducing valves to fix this problem, so they may need to manually feed the boiler with water into the feed until it reaches the desired 12 psi. Temperature setting may also need to be done.
Other issues may include a sudden change in the water level or a gradual change in mineral deposits which may be present in the boiler. To take care of this problem, it is advised to check the reading of the Tridicator. This gadget displays the combination pressure. Sometimes the water may rise because of mineral deposits. If this is the case, the boiler will need to be flushed.
If the problem still occurs, it might be a good idea to hire a gas boiler service company to do the job for you. It is very affordable if the consumer looks in the right places. The contractors should also have experience knowing how to read pressure levels and check expansion tanks.
Any repairs that need to be done to the circulator should be handled by a professional technician. Most of the time, if this is the case then the circulator will need new pump seal. If the pressure relief valve is leaking, then the tank may need to be filled with water. Sometimes, the valve will not close, so the tech might close the boiler water valve and remove the relief valve. This valve will later need to be replaced. The valve may be plugged if no water is discharging from the pressure relief valve.
The contractor should also know when the expansion tank has too much water and what that stems from. Sometimes, it is not always mineral deposits that cause this. Most expansion tanks are attached at the bottom of the boiler (for the newer versions). A quality gas boiler service will examine and fix all of the issues without charging an outstanding fee.